Dr. Scientist Bitquest
$265.00
If you’re on a quest that takes you far from home, you can’t be weighed down. You never know when you’ll need to duck under a laser cannon, or fight a giant eyeball, and you need to have portable and practical tools to face whatever alternate reality lays in store. It’s the same thing with your tone--sometimes it pays to have a compact, digital multi-tool that covers a wide range of tone needs. Enter the BitQuest: Complete with eight digital effects that work with or without a built in digital fuzz, the BitQuest offers flanger, HP/LP filter, bit crusher, infinite reverb, notch filter, ring mod, pitch shift and glitch delay, all in one pedal. No matter where the future takes you, BitQuest has got you covered.
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ
Quantity:
If you’re on a quest that takes you far from home, you can’t be weighed down. You never know when you’ll need to duck under a laser cannon, or fight a giant eyeball, and you need to have portable and practical tools to face whatever alternate reality lays in store. It’s the same thing with your tone--sometimes it pays to have a compact, digital multi-tool that covers a wide range of tone needs. Enter the BitQuest: Complete with eight digital effects that work with or without a built in digital fuzz, the BitQuest offers flanger, HP/LP filter, bit crusher, infinite reverb, notch filter, ring mod, pitch shift and glitch delay, all in one pedal. No matter where the future takes you, BitQuest has got you covered.
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ
If you’re on a quest that takes you far from home, you can’t be weighed down. You never know when you’ll need to duck under a laser cannon, or fight a giant eyeball, and you need to have portable and practical tools to face whatever alternate reality lays in store. It’s the same thing with your tone--sometimes it pays to have a compact, digital multi-tool that covers a wide range of tone needs. Enter the BitQuest: Complete with eight digital effects that work with or without a built in digital fuzz, the BitQuest offers flanger, HP/LP filter, bit crusher, infinite reverb, notch filter, ring mod, pitch shift and glitch delay, all in one pedal. No matter where the future takes you, BitQuest has got you covered.
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ
Operation:
Mono input, mono output
Power Requirements:
9VDC @ 75mA, 18VDC @ 150mA, 2.1mm center negative plug
Input/Output Impedance:
500kΩ/1kΩ
Bypass:
True bypass using soft touch switch and relay
Knobs Mix:
Dry signal only at min, Wet signal only at full
Vol:
Wet signal level
Treble:
+/-15dB peaking filter centred at 3kHz
CTRL0:
In Fuzz Mode this is the gain control, in Clean Mode this controls an effect parameter, depends on patch
CTRL1:
Controls an effect parameter, depends on patch
CTRL2:
Controls an effect parameter, depends on patch
Toggle Switch:
Fuzz Mode adds a versatile digital distortion to the effects, Clean Mode takes away the fuzz and adds an extra control parameter.
Expression Input:
Controls CTRL0, TRS input, 50kΩ